Is Honeycomb down?
Honeycomb is up
Right now
No. No incidents reported.
Last checked (2026-10-10 07:19 UTC) from status.honeycomb.io · every 180s
For agents
proceed
Proceed.
GET upbutler.com/status/honeycomb/status.agent.json
MCP: upstream_status {"service":"honeycomb"}
Tracing and event-based observability.
What Honeycomb says
Operational
Taken as is from Honeycomb's own status page API. Incident titles and component names below are theirs.
Open status.honeycomb.ioWhat UpButler measured
There is no keyless endpoint of Honeycomb that says anything useful, so UpButler does not probe it. To check your own Honeycomb account, add a monitor with your key: it is yours alone and catches what a shared probe cannot.
Honeycomb components
14 operational
- api.honeycomb.io - US1 Event IngestOperational
- ui.honeycomb.io - US1 QueryingOperational
- ui.honeycomb.io - US1 App InterfaceOperational
- ui.honeycomb.io - US1 Trigger & SLO AlertingOperational
- ui.honeycomb.io - US1 Activity LogOperational
- ui.honeycomb.io - US1 EnhanceOperational
- api.eu1.honeycomb.io - EU1 Event IngestOperational
- ui.eu1.honeycomb.io - EU1 App InterfaceOperational
- ui.eu1.honeycomb.io - EU1 QueryingOperational
- ui.eu1.honeycomb.io - EU1 Trigger & SLO AlertingOperational
- ui.eu1.honeycomb.io - EU1 Activity LogOperational
- ui.eu1.honeycomb.io - EU1 EnhanceOperational
- www.honeycomb.ioOperational
- SandboxOperational
Honeycomb incidents, last 90 days
- 2026-07-13: no record
- 2026-07-14: no record
- 2026-07-15: no record
- 2026-07-16: no record
- 2026-07-17: no record
- 2026-07-18: no record
- 2026-07-19: no record
- 2026-07-20: no record
- 2026-07-21: no record
- 2026-07-22: no record
- 2026-07-23: no record
- 2026-07-24: no record
- 2026-07-25: no record
- 2026-07-26: no record
- 2026-07-27: no record
- 2026-07-28: no record
- 2026-07-29: no record
- 2026-07-30: no record
- 2026-07-31: no record
- 2026-08-01: no record
- 2026-08-02: no record
- 2026-08-03: no record
- 2026-08-04: no record
- 2026-08-05: no record
- 2026-08-06: no record
- 2026-08-07: no record
- 2026-08-08: no record
- 2026-08-09: no record
- 2026-08-10: no record
- 2026-08-11: no record
- 2026-08-12: no record
- 2026-08-13: no record
- 2026-08-14: no record
- 2026-08-15: no record
- 2026-08-16: no record
- 2026-08-17: no record
- 2026-08-18: no record
- 2026-08-19: no record
- 2026-08-20: no record
- 2026-08-21: no record
- 2026-08-22: no record
- 2026-08-23: no record
- 2026-08-24: no record
- 2026-08-25: no record
- 2026-08-26: no record
- 2026-08-27: no record
- 2026-08-28: no record
- 2026-08-29: no record
- 2026-08-30: no record
- 2026-08-31: no record
- 2026-09-01: no record
- 2026-09-02: no record
- 2026-09-03: no record
- 2026-09-04: no record
- 2026-09-05: no record
- 2026-09-06: no record
- 2026-09-07: no record
- 2026-09-08: no record
- 2026-09-09: no record
- 2026-09-10: no record
- 2026-09-11: no record
- 2026-09-12: no record
- 2026-09-13: no record
- 2026-09-14: no record
- 2026-09-15: no record
- 2026-09-16: no record
- 2026-09-17: no record
- 2026-09-18: no record
- 2026-09-19: no record
- 2026-09-20: no record
- 2026-09-21: no record
- 2026-09-22: no record
- 2026-09-23: no record
- 2026-09-24: no record
- 2026-09-25: no record
- 2026-09-26: no record
- 2026-09-27: no record
- 2026-09-28: no record
- 2026-09-29: no record
- 2026-09-30: no record
- 2026-10-01: no record
- 2026-10-02: no record
- 2026-10-03: no record
- 2026-10-04: no record
- 2026-10-05: no record
- 2026-10-06: no record
- 2026-10-07: no record
- 2026-10-08: no record
- 2026-10-09: no record
- 2026-10-10: no incident reported
Each bar is a day, coloured by the worst incident Honeycomb reported. It is their incident record, not a measurement of uptime.
No finished incidents on record yet since 2026-10-10. UpButler keeps what Honeycomb publishes for 90 days from the day it starts tracking a service.
Get alerted when Honeycomb goes down
No account. One email when Honeycomb reports an incident, one when it is over. You confirm the address first, and every email has a one-click unsubscribe.
Or follow the RSS feed. On UpButler? Add Honeycomb as a dependency to route it to Slack, Teams or a webhook.
Status badge
Show Honeycomb's current status in a README or an internal wiki. It updates by itself.
[](https://upbutler.com/status/honeycomb)Tell your outage from Honeycomb's
Declare that your project depends on Honeycomb. When one of your monitors fails while Honeycomb has an incident that began around the same time, UpButler tags your incident "likely upstream" with their incident linked, says so in the alert and the AI report, and tells your on-call agent not to change code.
npx upbutler init finds the dependency from your env var names and packages. The catalog, dependencies and upstream-aware incidents are on every plan, including Free.
# upbutler.yaml
dependencies:
- honeycombcurl -s https://upbutler.com/status/honeycomb/status.agent.json{
"schema": "upbutler.upstream-status/v1",
"service": "honeycomb",
"verdict": "proceed",
"status": "operational",
"reason": "No incidents reported",
"retryAfterSec": null,
"incident": null,
"probe": null
}Questions
- Is Honeycomb down right now?
- No. As of 2026-10-10 07:19 UTC, Honeycomb is up. This page reads the status again every 3 minutes.
- Where does this status come from?
- From Honeycomb's own status page API at https://status.honeycomb.io. UpButler reads it once for everyone (not once per visitor) every 3 minutes with conditional requests, and shows it unchanged: incident titles and component names are Honeycomb's words.
- Can I get an alert when Honeycomb goes down?
- Yes, without an account: enter your email on this page, confirm the link we send, and you get one email when Honeycomb reports an incident and one when it is over. There is also an RSS feed at https://upbutler.com/status/honeycomb/feed.rss. Teams on UpButler can route the same alert to Slack, Teams or a webhook.
- How can my agent or app check Honeycomb status?
- Fetch https://upbutler.com/status/honeycomb/status.agent.json: a small JSON document with a verdict (proceed, retry, fallback or pause) and retryAfterSec. No key is needed. The same answer is an MCP tool, upstream_status {"service":"honeycomb"}, on https://upbutler.com/mcp/public.
- How do I know whether an outage is mine or Honeycomb's?
- Add "honeycomb" to the dependencies of your UpButler workspace. When one of your monitors fails while Honeycomb has an incident that began around the same time, your incident is tagged "likely upstream" with their incident linked, and your on-call agent is told not to change code.
Also check
UpButler is not affiliated with Honeycomb. Status and incident text belong to Honeycomb and are read from their public status source; the probe result is UpButler's own measurement.