Is Hygraph down?
Hygraph is up
Right now
No. No incidents reported.
Last checked (2026-10-10 07:13 UTC) from status.hygraph.com · every 180s
For agents
proceed
Proceed.
GET upbutler.com/status/hygraph/status.agent.json
MCP: upstream_status {"service":"hygraph"}
GraphQL-native headless CMS.
What Hygraph says
Operational
Taken as is from Hygraph's own status page API. Incident titles and component names below are theirs.
Open status.hygraph.comWhat UpButler measured
There is no keyless endpoint of Hygraph that says anything useful, so UpButler does not probe it. To check your own Hygraph account, add a monitor with your key: it is yours alone and catches what a shared probe cannot.
Hygraph components
25 operational
- Asset CDNOperational
- AP-NORTHEAST-1Operational
- AP-SOUTH-1Operational
- AP-SOUTHEAST-2Operational
- CA-CENTRAL-1Operational
- EU-CENTRAL-1Operational
- EU-NORTH-1Operational
- EU-WEST-1Operational
- EU-WEST-2Operational
- SA-EAST-1Operational
- US-EAST-1Operational
- US-WEST-2Operational
- Directory APIOperational
- AP-NORTHEAST-1Operational
- AP-SOUTH-1Operational
- AP-SOUTHEAST-2Operational
- CA-CENTRAL-1Operational
- EU-CENTRAL-1Operational
- EU-NORTH-1Operational
- EU-WEST-1Operational
- EU-WEST-2Operational
- SA-EAST-1Operational
- US-EAST-1Operational
- US-WEST-2Operational
- ClassicOperational
Hygraph incidents, last 90 days
- 2026-07-13: no record
- 2026-07-14: no record
- 2026-07-15: no record
- 2026-07-16: no record
- 2026-07-17: no record
- 2026-07-18: no record
- 2026-07-19: no record
- 2026-07-20: no record
- 2026-07-21: no record
- 2026-07-22: no record
- 2026-07-23: no record
- 2026-07-24: no record
- 2026-07-25: no record
- 2026-07-26: no record
- 2026-07-27: no record
- 2026-07-28: no record
- 2026-07-29: no record
- 2026-07-30: no record
- 2026-07-31: no record
- 2026-08-01: no record
- 2026-08-02: no record
- 2026-08-03: no record
- 2026-08-04: no record
- 2026-08-05: no record
- 2026-08-06: no record
- 2026-08-07: no record
- 2026-08-08: no record
- 2026-08-09: no record
- 2026-08-10: no record
- 2026-08-11: no record
- 2026-08-12: no record
- 2026-08-13: no record
- 2026-08-14: no record
- 2026-08-15: no record
- 2026-08-16: no record
- 2026-08-17: no record
- 2026-08-18: no record
- 2026-08-19: no record
- 2026-08-20: no record
- 2026-08-21: no record
- 2026-08-22: no record
- 2026-08-23: no record
- 2026-08-24: no record
- 2026-08-25: no record
- 2026-08-26: no record
- 2026-08-27: no record
- 2026-08-28: no record
- 2026-08-29: no record
- 2026-08-30: no record
- 2026-08-31: no record
- 2026-09-01: no record
- 2026-09-02: no record
- 2026-09-03: no record
- 2026-09-04: no record
- 2026-09-05: no record
- 2026-09-06: no record
- 2026-09-07: no record
- 2026-09-08: no record
- 2026-09-09: no record
- 2026-09-10: no record
- 2026-09-11: no record
- 2026-09-12: no record
- 2026-09-13: no record
- 2026-09-14: no record
- 2026-09-15: no record
- 2026-09-16: no record
- 2026-09-17: no record
- 2026-09-18: no record
- 2026-09-19: no record
- 2026-09-20: no record
- 2026-09-21: no record
- 2026-09-22: no record
- 2026-09-23: no record
- 2026-09-24: no record
- 2026-09-25: no record
- 2026-09-26: no record
- 2026-09-27: no record
- 2026-09-28: no record
- 2026-09-29: no record
- 2026-09-30: no record
- 2026-10-01: no record
- 2026-10-02: no record
- 2026-10-03: no record
- 2026-10-04: no record
- 2026-10-05: no record
- 2026-10-06: no record
- 2026-10-07: no record
- 2026-10-08: no record
- 2026-10-09: no record
- 2026-10-10: no incident reported
Each bar is a day, coloured by the worst incident Hygraph reported. It is their incident record, not a measurement of uptime.
No finished incidents on record yet since 2026-10-10. UpButler keeps what Hygraph publishes for 90 days from the day it starts tracking a service.
Get alerted when Hygraph goes down
No account. One email when Hygraph reports an incident, one when it is over. You confirm the address first, and every email has a one-click unsubscribe.
Or follow the RSS feed. On UpButler? Add Hygraph as a dependency to route it to Slack, Teams or a webhook.
Status badge
Show Hygraph's current status in a README or an internal wiki. It updates by itself.
[](https://upbutler.com/status/hygraph)Tell your outage from Hygraph's
Declare that your project depends on Hygraph. When one of your monitors fails while Hygraph has an incident that began around the same time, UpButler tags your incident "likely upstream" with their incident linked, says so in the alert and the AI report, and tells your on-call agent not to change code.
npx upbutler init finds the dependency from your env var names and packages. The catalog, dependencies and upstream-aware incidents are on every plan, including Free.
# upbutler.yaml
dependencies:
- hygraphcurl -s https://upbutler.com/status/hygraph/status.agent.json{
"schema": "upbutler.upstream-status/v1",
"service": "hygraph",
"verdict": "proceed",
"status": "operational",
"reason": "No incidents reported",
"retryAfterSec": null,
"incident": null,
"probe": null
}Questions
- Is Hygraph down right now?
- No. As of 2026-10-10 07:13 UTC, Hygraph is up. This page reads the status again every 3 minutes.
- Where does this status come from?
- From Hygraph's own status page API at https://status.hygraph.com. UpButler reads it once for everyone (not once per visitor) every 3 minutes with conditional requests, and shows it unchanged: incident titles and component names are Hygraph's words.
- Can I get an alert when Hygraph goes down?
- Yes, without an account: enter your email on this page, confirm the link we send, and you get one email when Hygraph reports an incident and one when it is over. There is also an RSS feed at https://upbutler.com/status/hygraph/feed.rss. Teams on UpButler can route the same alert to Slack, Teams or a webhook.
- How can my agent or app check Hygraph status?
- Fetch https://upbutler.com/status/hygraph/status.agent.json: a small JSON document with a verdict (proceed, retry, fallback or pause) and retryAfterSec. No key is needed. The same answer is an MCP tool, upstream_status {"service":"hygraph"}, on https://upbutler.com/mcp/public.
- How do I know whether an outage is mine or Hygraph's?
- Add "hygraph" to the dependencies of your UpButler workspace. When one of your monitors fails while Hygraph has an incident that began around the same time, your incident is tagged "likely upstream" with their incident linked, and your on-call agent is told not to change code.
Also check
UpButler is not affiliated with Hygraph. Status and incident text belong to Hygraph and are read from their public status source; the probe result is UpButler's own measurement.